Polycom RealPresence Resource Manager System Operations Guide Delete an MCU Bridge
298 Polycom, Inc.
Delete an MCU Bridge
To delete an MCU from the RealPresence Resource Manager system
1 Go to Network Device > MCUs.
2 As needed, use the Filter to customize the MCU list.
3 Select the MCU of interest and click Delete.
4 Click Yes to confirm the deletion.
The MCU list is updated.
View Bridge Hardware
To view the hardware configuration of a bridge
1 Go to Network Device > MCUs.
2 As needed, use the Filter to customize the MCU list.
3 In the MCU list, select the bridge of interest and click View Hardware.
A Hardware pane appears below the bridge list. It lists the hardware for
the selected bridge and displays the Slot number, Card Type, Status,
Temperature, and Voltage for each piece of hardware.
Entry Queue
Number ID
The IP number that conference participants dial to
access the IVR prompt to join a conference.
Max CP
Resolution
Set this to the highest available video format. Choices
are: HD1080, CIF, SD15, SD30, and HD720.
Refer to the RMX 2000/4000 Administrator’s Guide
for more information about this field.
Max Bandwidth
Capacity (Kbps)
The maximum bandwidth supported by the Polycom
RMX MCU.
Field Description
