Polycom RealPresence Resource Manager System Operations Guide Available Settings for a Site Provisioning Profile
228 Polycom, Inc.
You should customize this site provisioning profile for your needs, as well as
the site provisioning profiles for any new sites that you may add.
To edit the site provisioning profile for a site
1 Go to Admin > Topology > Sites or Admin > Topology > Site Topology.
2 In the Sites list or Site Topology page, select the site of interest and click
Edit Site Provisioning Details.
3 As needed, edit the site provisioning details and click Apply. For
information about these details, see “Available Settings for a Site
Provisioning Profile” on page 228.
4 Click OK.
Available Settings for a Site Provisioning Profile
Table 16-1 Available Settings for a Site Provisioning Profile
Field For the endpoint systems at the site being provisioned...
Date and Time Settings
Country Specify the country code for their location.
Date Format Specify the date display format.
Auto Adjust for
Daylight Saving Time
Specify whether or not to adjust the endpoint’s system clock for daylight savings
time.
Time Format Specify the time display format.
Time Server Specify whether to connect to a time server for automatic system time settings.
Select Auto to require that the video endpoint system synchronize with an external
time server that is identified by a network domain controller. Because it is identified
by a network domain controller, you do not need to enter the IP address of the time
server.
Select Manual to require that the video endpoint system synchronize with an external
time server that may not be identified by a network domain controller. In this case,
you must also enter the IP address of the time server in the Time Server Address
field.
If Time Server is set to Off, or if the Time Server is set to Manual or Auto but the
endpoint system cannot connect to the time server, the date and time must be
manually reset at the endpoint.
Primary Time Server
Address
Specify the address of the primary time server when Time Server is set to Manual.
Secondary Time
Server Address
Specify the address of the secondary time server when Time Server is set to Manual.
