Polycom RealPresence Resource Manager System Operations Guide Endpoint Fields for Scheduled Provisioning
178 Polycom, Inc.
Mute Auto Answer
Calls
Specifies whether to mute incoming calls.
Incoming calls are muted by default until you press the
mute on the microphone or on the remote control.
YYY
Line Input Specifies the type of equipment that is connected to
audio input 1.
YY
Input Type Level Sets the volume level for audio input 1. Y Y
Line Input Level Sets the volume level for audio input 2. Y Y
Line Outputs Specifies how the audio output behaves. The default
selection, Monitor - Far Site Audio, supplies audio to
the Monitor 1 audio outputs only when the system is
receiving audio from the far site.
If you have connected a VCR to record the conference,
select Monitor - Far and Near Audio to supply audio
from both the far site and the system’s microphones.
YY
Line Output Level Sets the volume level for audio output Y Y
Audio Settings > Audio Settings 2
Master Audio Volume Sets the volume level for audio from the far site. Y Y Y
Midrange Speakers Specifies whether to use the system’s built-in midrange
speaker. You may prefer to turn off the midrange
speaker if you connect the audio output to Monitor 1 or
if you connect an external speaker system.
—Y
Bass Sets the volume level for the low frequencies without
changing the master audio volume.
YY
Treble Sets the volume level for the high frequencies without
changing the master audio volume.
YY
LAN Properties > LAN Properties 1
Connect to My LAN Enables connection to the local area network Y Y
IP Address Specifies how the system obtains an IP address.
• Obtain IP Address Automatically — Select if the
system gets an IP address from the DHCP server on
the LAN.
• Enter IP Address Manually — Select if the IP
address will not be assigned automatically.
YYY
Use the Following IP
Address
If you selected Enter IP Address Manually, enter the IP
address here.
YYY
Field For the endpoint systems being provisioned...
HDX Series
VSX Series
QDX Series
