Endpoint Usage Report System Reports
Polycom, Inc. 555
Field Description
Start Date Time Specifies the start date and time for the
conference.
End Date Time Specifies the end date for the report. This also
defaults to the current date.
Call Duration Specifies how long the call lasted in hours,
minutes, and seconds.
Account Number If Require Account Number to Dial is enabled on
the system, the value entered by the user is
displayed in this field.
Remote System Name Specifies the endpoint to which the endpoint was
connected for the call.
Call Number 1
Call Number 2
Specifies the IP or ISDN numbers for the
endpoints to which the endpoint was connected
for the call.
Transport Type The type of call — Either H.320 (ISDN), H.323 (IP),
or SIP.
Call Rate The bandwidth negotiated with the far site.
System Manufacturer The name of the system manufacturer, model,
and software version, if they can be determined.
Call Direction In — For calls received.
Out — For calls placed from the system.
Conference ID A number given to each conference. A
conference can include more than one far site, so
there may be more than one row with the same
conference ID.
Call ID Identifies individual calls within the same
conference.
H.320 Channels The total number of ISDN B channels used in the
call. For example, a 384K call would use six B
channels.
Endpoint Alias The alias of the far site.
Endpoint Additional
Alias
An additional alias of the far site.
Endpoint Type Terminal, gateway, or MCU.
Endpoint Transport
Address
The actual address of the far site (not necessarily
the address dialed).
