Available Settings for a Site Provisioning Profile Using Site Provisioning Profiles
Polycom, Inc. 229
Timezone Specify the time difference between GMT (Greenwich Mean Time) and the endpoint
system’s location.
Firewall Settings
Use Fixed Ports Specify whether to define the TCP and UDP ports.
• If the firewall is H.323 compatible or the endpoint systems are not behind a firewall,
disable this setting.
• If the firewall is not H.323 compatible, enable this setting. The endpoint systems
will assign a range of ports starting with the TCP and UDP ports you specify. The
endpoint system defaults to a range beginning with port 3230 for both TCP and
UDP.
Note
You must open the corresponding ports in the firewall. You must also open the
firewall’s TCP port 1720 to allow H.323 traffic.
Start TCP Port Lets you specify the beginning value for the range of TCP ports used by the endpoint
systems. The endpoint systems will automatically assign a range of ports starting with
the port you specify.
Note
You must also open the firewall’s TCP port 1720 to allow H.323 traffic.
Start UDP Port Lets you specify the beginning value for the range of TCP ports used by the endpoint
systems. The endpoint systems will automatically assign a range of ports starting with
the port you specify.
Enable H.460 Firewall
Traversal
Allows the endpoint system to use H.460-based firewall traversal. For more
information, see the Administrator’s Guide for Polycom HDX Systems.
NAT Configuration Specify whether the endpoint systems should determine the NAT Public WAN
Address automatically.
• If the endpoint systems are behind a NAT that allows HTTP traffic, select Auto.
• If the endpoint systems are behind a NAT that does not allow HTTP traffic, select
Manual. Then specify a NAT Public (WAN) Address.
• If the endpoint systems are not behind a NAT or are connected to the IP network
through a virtual private network (VPN), select Off.
NAT Public (WAN)
Address
When NAT Configuration is set to Manual, specify the address that callers from
outside the LAN should use to call the endpoint systems.
NAT is H.323
Compatible
Specify that the endpoint systems are behind a NAT that is capable of translating
H.323 traffic.
Address Displayed in
Global Directory
Specify whether to include the endpoint system’s information in the global directory
• Select Private to exclude the endpoint from the global directory
• Select Public to include the endpoint in the global directory
Table 16-1
Available Settings for a Site Provisioning Profile
Field For the endpoint systems at the site being provisioned...
