Polycom RealPresence Resource Manager System Operations Guide Provision Endpoints with SIP Server Settings
276 Polycom, Inc.
—
domain
—Specifies the domain the user uses to log in to the
RealPresence Resource Manager system.
—
username
—Specifies the RealPresence RealPresenceResource
Manager system user name.
—
deviceType
—Specifies the device type (valid values are HDX, VVX,
and CMADesktop or RPMobile).
—
URI
—Specifies the SIP URI for this user.
For example:
local,johndoe,HDX,johndoe@example.com
2 From the RealPresence Resource Manager system, go to Admin >
Uploads.
a Click Upload.
b Navigate to the CSV file, select it, and click Open.
Whenever you add new users or rooms or need change a SIP URI, you
must provide SIP URI data. For the methods available for editing the SIP
URI, see “Edit SIP URI Data” on page 276.
Edit SIP URI Data
You can edit SIP URI data in the following ways:
• Upload a CSV file that has changes or new data. Data in the CSV file is
added to any existing data. For information about the CSV file format and
the upload process, see “Import SIP URI Data” on page 275.
• Edit individual users or rooms. For each RealPresence Resource Manager
system user or room, you can add or edit the SIP URI in the Dial String
Reservations section of the Edit User or Edit Room dialog box.
Provision SIP Settings for SIP Server Integration
By default, SIP is disabled in site provisioning. This procedure describes how
to change existing site provisioning settings so that they provision integration
with a SIP server.
When you add a site to the RealPresence Resource Manager system, you also
set up site provisioning, which includes the SIP settings. Be sure to enable SIP
and configure the servers, protocol, and credentials needed for your SIP sever.
To provision SIP for integration with a SIP server
1 Go to Admin > Topology > Sites.
2 In the Sites page, select the site of interest and click Edit Site
Provisioning Details.
