![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/8/87/887619b9-ad82-4108-b8bb-15d7e7a23b9d/887619b9-ad82-4108-b8bb-15d7e7a23b9d-bg106.png)
Polycom RealPresence Resource Manager System Operations Guide Setting up Endpoint Naming and Number
240 Polycom, Inc.
3 When finished defining your numbering scheme, click Update.
Settings are applied the next time the endpoint polls for a dynamic
provisioning update.
Define a System Naming Scheme
You can define an system naming scheme that will be provisioned to all
dynamically-managed endpoints.
To define a system naming scheme for dynamically-managed endpoints
1 Navigate to Admin > Topology > System Naming.
2 Build your system naming scheme.
Base Field •Specify Number Range—Identify a number range to be
used. The system uses a number from this number range
to create the E.164 assignment.
• Use Phone Number—The system will use a portion of the
user’s phone number to create the E.164 assignment.
• Maximum number of digits to use from the user’s phone
number (between 3 and 10 digits). The digits from the
phone number are selected from right to left.
• Number range to use if phone number is empty (reverts
to Specify Number Range)—The system will revert to using
a number range if the user’s phone number is empty.
Suffix • No Suffix—The system will not append a suffix to create
the E.164 assignment.
•A Number —The system appends the suffix specified to
create the E.164 assignment.
• Based on Device Type—The system appends a
pre-defined Device Type suffix to create the E.164
assignment.
You can use the suggested prefix or click the Device
Number field to edit the prefix for the device type.
This option is not available if you used a prefix based on
the device type.
The total number of digits specified for an E.164 number must be 15 or less. If the
user’s phone number is used as the base field, the system reserves one digit to
differentiate between the user’s multiple devices. In this case the total number of
digits configured cannot exceed 14 digits.
Option Usage