Filter
Top Products
Section 3F: Using Wireless Connections 209
Wireless Connections
3. Enter the following settings, and then press Next (right softkey):
Ⅲ Authentication: Set the method used to identify
devices that connect to the network:
Ⅲ Open: The network uses open authentication.
Ⅲ Shared: The network uses shared authentication.
Ⅲ WPA: The network is a WPA network that uses
802.1x protocols.
Ⅲ WPA-PSK: The network is a WPA network that
requires a password that is shared between the
network and your Treo Pro smartphone. (This
password is also known as a pre-shared key [PSK].)
Ⅲ WPA2: The network provides government grade security with an AES
encryption algorithm.
Ⅲ WPA2-PSK: The network is a WPA2 network that requires a pre-shared key.
Ⅲ Data Encryption: Set the encryption method. (The options in this list vary based on
your Authentication setting.)
Ⅲ Disabled: Turn data encryption off.
Ⅲ WEP: Turn on the Wired Equivalent Privacy encryption method.
Ⅲ TKIP: Turn on the Temporal Key Integrity Protocol encryption method. (This
method is often used to encrypt WPA and WPA-PSK connections.)
Ⅲ AES: Turn on the Advanced Encryption Standard protocol. (This method is often
used to encrypt WPA, WPA-PSK, WPA2, and WPA2-PSK connections.)
Ⅲ The key is automatically provided: Set whether you need to specify the network key
and key index provided by your system administrator, or whether the network
provides this information. (The availability of these options varies based on your
Authentication and Data Encryption settings.)