Filter
Top Products
Section 3F: Using Wireless Connections 211
Wireless Connections
ⅷ To remove the network settings from memory, from the Configure Wireless Networks
screen, press Menu (right softkey) and select Remove Settings. (The next time you’re within
range and the Wi-Fi feature is turned on, you must re-create the connection to connect to
this network.)
Customizing Wi-Fi Settings
1. Press Start and select Settings.
2. Select the Connections tab, and then select Wi-Fi Prefs . (The Main and Advanced
tabs show the status of the Wi-Fi feature and display information about an active Wi-Fi
connection.)
3. Select the Power Mode tab and set any of the following:
Ⅲ Power Save Mode: Adjusts power consumption
between maximizing network connection performance
and maximizing battery life.
Ⅲ Connection: Sets when the Wi-Fi feature is on and
when your device attempts to search for networks.
Ⅲ On button press: Leaves the Wi-Fi feature off until
you press Wi-Fi to turn it on. (After you turn the
Wi-Fi feature on, your smartphone searches for
available networks. If a network to which you previously connected is available,
your smartphone automatically connects to that network.)
Ⅲ Always On: Leaves the Wi-Fi feature on, and your smartphone searches for
available networks whenever the screen is awake. (If a network to which you
previously connected is available, your smartphone automatically connects to
that network. When this mode is enabled, you can prevent your device from
searching for networks by pressing and holding Wi-Fi to turn the Wi-Fi
feature off.)