Filter
Top Products
3
148 Nokia Network Voyager for IPSO 4.0 Reference Guide
12. (Optional) Enter a path for clients to get additional configuration options in the Extensions
Path text box.
Note
You must configure the TFTP option to use the Extension Path option since clients will
use TFTP to transfer the configuration options from the server.
13. (Optional) Enter the root path where diskless clients mount a network file system (NFS) in
the Root Filename text box.
14. Enter the IP address of the default router clients will use in the Router text box.
15. (Optional) Enter the domain name you want clients to use in the Domain text box.
16. (Optional) Enter the time offset for clients in the Time Offset text box.
17. (Optional) Enter the IP address or the name of the swap server diskless clients will use in the
Swap Server text box.
18. Enter the Domain Name System (DNS) server clients will use to resolve domain names in
the DNS Servers text box.
19. Enter the Network Time Protocol (NTP) servers clients will use in the NTP Servers text box.
Enter the servers you want clients to use in the order of preference separated by commas.
20. Enter the Simple Mail Transfer Protocol (SMTP) servers available to clients, separated by
commas, in the SMTP Servers text box.
21. If you configure NetBIOS, enter the Windows Internet Naming Servers (WINS) available to
clients in the WINS text box.
22. If you configure NetBIOS, enter the Datagram Distribution (DD) servers available to clients,
separated by commas, in the DD Servers text box.
23. If you configure NetBIOS, enter the node type that the client will configure itself as in the
Node Type text box.
24. If you configure NetBIOS, enter the scope for the client in the Scope text box.
25. Click Apply.
26. Click Save to make your changes permanent.
DHCP Server Configuration
To enable the DHCP server process
1. Click DHCP under Configuration > System Configuration in the tree view.
2. Click Server in the DHCP Service Selection box.
3. Click Apply.