Filter
Top Products
12
488 Nokia Network Voyager for IPSO 4.0 Reference Guide
Using the iclid Tool
Obtain routing diagnostic information by creating a telnet session on the IP security platform
and running iclid (IPSRD command-line interface daemon).
To display routing daemon status using iclid
1. Create a Telnet session and log into the firewall.
2. Type iclid
The prompt changes (to <node-name>) to indicate that you can now enter iclid commands.
iclid Commands
Some commands might produce more output than can fit on a single screen; iclid pages the
output of such commands for you, that is, stops the output after one screen and indicates that
there is more output with a MORE prompt. You can see the next screenful of output by selecting
any key except the
q key; you can abort the command and any further output by typing q at the
MORE prompt. If you do not enter anything within about 30 seconds, the system automatically
pages to the next screenful of information. You can temporarily defeat this automatic paging by
typing ctl-S, although when you resume scrolling (by selecting any key) you might lose a page
of information.
At any point in iclid, you can type
? to display possible command completions. You can also
abbreviate commands when an abbreviation is not ambiguous.
The help command takes as arguments iclid commands and top-level iclid categories; it displays
a brief summary of what the specified command displays.
The quit command returns control to the firewall shell. The exit command is the same as the quit
command.
The show command provides many kinds of information, displayed in useful formats. The
following table shows examples of the top-level iclid element that can be displayed by the show
command as applied to each parameter, along with any selected categories and subcategories,
and a description of the information the command displays.
Command Description
? or <tab> Shows all possible command completions.
help
Displays help information.
quit or exit Quits iclid.
show
Shows formatted, categorized system information.
Element Category Subcategory Description