Filter
Top Products
3
166 Nokia Network Voyager for IPSO 4.0 Reference Guide
5. Click Apply.
6. Click Save to make your changes permanent.
Changing the Hostname
You set the hostname during initial configuration. To identify the hostname (system name) of
your security platform, click Hostname under Configuration > System Configuration in the tree
view. The hostname is also displayed in each page header.
Note
Host address assignments must match an IP address.
You can change the hostname at any time using the following procedure.
To change the hostname
1. Click Hostname under Configuration > System Configuration in the tree view.
2. Enter the new hostname.
3. Click Apply.
4. Click Save to make your changes permanent.
Managing Configuration Sets
You can save the system state that is currently running to a new configuration database file. You
can also create a new configuration database file using factory defaults that is known to work
correctly.
To save the active configuration as a new configuration set, use the following procedure. The
active configuration might be different from that of the current configuration file if you have
applied changes but not saved them.
To save the current configuration into a new configuration database file
1. Click Configuration Sets under Configuration > System Configuration in the tree view.
2. Enter the name of the new configuration file in the Save current state to new configuration
database field.
3. Click Apply.
The current configuration is saved in the new file, and the file appears in the list of database files
on this page. Subsequent configuration changes are saved in the new file.
To create a new configuration database file that contains only the factory default configuration
settings, use the following procedure.