Filter
Top Products
Nokia Network Voyager for IPSO 4.0 Reference Guide 87
19. Click the logical interface name in the Interface column of the Logical interfaces table to go
the Interface page.
20. Enter the IP address for the local end of the PVC in the Local address text box.
21. Enter the IP address of the remote end of the PVC in the Remote address text box.
Click Apply.
22. (Optional) Change the interfaces logical name to a more meaningful name by typing the
preferred name in the Logical name text box.
23. Click Apply.
24. Click Save to make your changes permanent.
Serial Interface Example
This section describes how you might configure the interfaces of your IP security platform in an
example network, using Network Voyager.
The following figure shows the network configuration for this example.
In a company’s main office, Nokia Platform A terminates a serial line to an Internet service
provider, running PPP with a keepalive value of 10.
Nokia Platform A also provides Internet access for a FDDI ring and a remote branch office
connected through ATM PVC 93.
Nokia Platform A
Nokia Platform B
atm-s1p1c52 (192.168.3.1)
atm-s2p1c93 (192.168.3.2)
ser-s1p1c0 (192.168.2.1)
eth-s2p1c0 (192.168.4.1/24)
192.168.4.xxx
FDDI
192.168.1.xxx
(192.168.1.1/24)
fddi-s3p1c0
(192.168.2.93)
Provider
00037
Server
Server Server
ATM
Switch