Filter
Top Products
8
344 Nokia Network Voyager for IPSO 4.0 Reference Guide
IPSec Tunnel Rule Example
The following steps tell how to configure a sample IPSec tunnel. The following figure below
shows the network configuration for this example.
To configure Nokia Platform 1
1. Click IPSec under Configuration > Security and Access in the tree view.
2. Under the Proposals table, enter md5-des as a name for a new proposal in the New Proposal
text box.
3. In the Type field, select the ESP button.
4. Select MD5 from the Authentication Alg drop-down list and DES from the Encryption Alg
drop-down list. Click Apply.
5. In the Filters table, enter site_A as a new filter name in the New Filter text box. Enter
192.68.22.0 in the Address text box and 24 in the Mask Length text box. Click Apply.
The new entry appears in the Filters table.
6. In the Filters table, enter
site_B as a new filter name in the New Filter text box. Enter
192.68.23.0 in the Address text box and 24 in the Mask Length text box. Click Apply.
Note
In this example, the authentication method is a preshared secret, so you don’t need to
select a certificate.
7. (Optional) Click the IPSec Advanced Configuration link.
Nokia Platform 1 Nokia Platform 2
192.68.22.0/24 192.68.23.0/24
192.68.26.74/30192.68.26.65/30
00040
Internet
IPsec Tunnel
Remote PCs
Site A
Remote PCs
Site B