Filter
Top Products
Nokia Network Voyager for IPSO 4.0 Reference Guide 303
domain name (FQDN) for your platform: for example, www.ship.wwwidgets.com. If you
are generating a certificate signing request for a CA, that CA might impose a different
standard.
g. (Optional) In the Email Address field, enter the email address to use to contact the person
responsible for this system or for its certificate.
5. Select one of the following:
Certificate Signing Request (CSR)
Select this option if you are requesting a certificate from a certification authority.
Self-Signed X.509 Certificate
Select this option to create a certificate that you can use immediately, but that will not be
validated by a certification authority.
6. Click Submit.
7. If you generated a certificate signing request, a screen appears that contains a certificate
request—New X.509 certificate signing request—and its associated private key—New
private key.
a. Send the New X.509 certificate signing request to your certification authority. Be sure to
include the lines -----BEGIN CERTIFICATE REQUEST----- and -----END
CERTIFICATE REQUEST-----.
b. Store the new private key that your certification authority securely sends. Install the
private key and the certificate. (See Installing a Certificate later in this section.)
8. If you generated a self-signed certificate, a screen appears that contains a certificate (New
X.509 Certificate) and its associated private key.
You must perform a cut-and-paste operation to move the certificate and the private key to
the Voyager SSL Certificate page, as described in the following procedure.
Installing the SSL/TLS Certificate
To install the certificate and its associated private key
1. Click Install Certificate for SSL under Configuration > Security and Access > Voyager in
the tree view.
2. Open the files that contain your certificate and private key.
3. Perform a cut-and-paste operation on your certificate to move it to the New server certificate
field in the Install Certificate for SSL page.
Be sure to include the lines -----BEGIN CERTIFICATE ----- and -----END CERTIFICATE -
----.
4. Perform a cut-and-paste operation on your private key to move it to the Associated private
key field in the Install Certificate for SSL page.
Be sure to include the lines -----BEGIN RSA PRIVATE KEY----- and -----END RSA
PRIVATE KEY-----.