Filter
Top Products
Nokia Network Voyager for IPSO 4.0 Reference Guide 421
5. Enter 100 in MED edit box next to the Enable redistribute bgp routes to AS100 field.
6. Enter necessary information for route redistribution according to the “BGP Multi Exit
Discriminator Example”; then click Apply.
7. Click Save to make your changes permanent.
Setting an MED value along with route redistribution policy allows Nokia Platform D to
redistribute all routes to AS100 with an MED value set to 100.
Note
Setting an MED value along with route redistribution overwrites the MED value for the
external BGP peer for Nokia Platform D.
Verification
To verify that you configured BGP MED values correctly, run the following commands in iclid.
show route
show bgp neighbor <peerid> advertised
show route bgp metrics
For more information on these commands, see “Viewing Routing Protocol Information.”
Changing the Local Preference Value Example
This example shows how to set up two IBGP peers, and how to configure routes learned using
Nokia Platform A to have a higher local preference value over Nokia Platform B (which has a
default local preference value of 100).
1. Configure the interface as in “Ethernet Interfaces.”
2. Click IGBP under Configuration > Routing Configuration in the tree view.
3. Enter
100 in the AS number text box; then click Apply.
Nokia
Platform A
Nokia
Platform C
Nokia
Platform B
IBGP
EBGP
EBGP
00332
20.10.10.2/24
20.10.10.1/24
20.10.5.1/24
20.10.5.2/24
Nokia
Platform D
20.10.15.2/24
20.10.5.1/24
AS100 AS676
AS342