Filter
Top Products
9
440 Nokia Network Voyager for IPSO 4.0 Reference Guide
BGP Route Redistribution Example
Route redistribution allows you to redistribute routes from one autonomous system into another
autonomous system.
To configure BGP route redistribution on Nokia Platform D
1. Click Route Redistribution under Configuration > Routing in the tree view.
2. Click BGP Routes Based on AS under the Redistribute to BGP section.
3. Select 100 from the Redistribute to Peer AS drop-down list.
4. Select 4 from the From AS drop-down list; then click Apply.
This procedure enables route redistribution from AS 4 to AS 100. By default, all routes that
are excluded from being redistributed from AS 4 are redistributed to AS 100.
To redistribute a single route
1. To restrict route redistribution to route 100.2.1.0/24, enter
100.2.1.0 in the New IP prefix
to redistribute text box.
2. Enter
24 in the Mask length text box; then click Apply.
3. Select Exact from the Match Type drop-down list; then click Apply.
This procedure enables redistribution of route 100.2.1.0/24 from AS 4 to AS 100. No other
routes are redistributed.
To redistribute all routes
1. To allow all routes to redistributed, click Accept next to All BGP AS 4 routes into AS 100
field.
2. Click Apply.
Redistributing Routes to RIP and IGRP
Redistributing to RIP and IGRP is controlled by any one of three parameters:
Nokia
Platform B
Nokia
Platform A
Nokia
Platform C
Nokia
Platform D
EBGP
EBGP
00339
AS100 AS200
AS4