Filter
Top Products
8
346 Nokia Network Voyager for IPSO 4.0 Reference Guide
Configure Nokia Platform 2
Now set up network application platform 2 (Nokia Platform 2). Perform the same steps that you
performed to configure Nokia Platform 1, with the following changes.
1. Step 18; enter
192.68.26.74 in the Local Address text box.
2. Step 19; enter
192.68.26.65 in the Remote Address text box.
3. Step 24; select
SITE_B from the Source Filters drop-down list.
4. Step 25; select
SITE_A from the Destination Filters drop-down list.
IPSec Transport Rule Example
The following procedure tells you how to configure a sample IPSec authentication connection.
The following figure shows the network configuration for this example.
To configure Nokia Platform 1 (IPSO)
1. Click IPSec under Configuration > Security and Access in the tree view of the network
application platform 1 (Nokia Platform 1, IPSO).
2. Under the Proposals table, enter ah-md5 as a name for a new proposal in the New Proposal
text box.
3. In the Type field, click AH.
4. Select MD5 from the Authentication Alg drop-down list and None from the Encryption Alg
drop-down list.
Click Apply.
5. In the Filters table, enter local as a new filter name in the New Filter text box.
Enter
192.68.26.65 in the Address text box and 32 in the Mask Length text box.
Click Apply.
The new entry appears in the Filters table.
6. In the Filters table, enter
remote as a new filter name in the New Filter text box.
Enter
192.68.26.74 in the Address text box and 32 in the Mask Length text box.
Click Apply.
Internet
Nokia Platform 1
(IPSO)
PC 1
192.68.26.74/30
eth-s1p3c0
192.68.26.65/30
00130