Filter
Top Products
Nokia Network Voyager for IPSO 4.0 Reference Guide 275
6. To redistribute a specific aggregate route or routes into RIPng, click On next to the IPv6
interface for the aggregate route to redistribute into RIPng.
7. Enter a value in the Metric text box for the metric cost that the created RIPng route will
have.
8. Click Apply.
9. Click Save to make your changes permanent.
Redistributing Interface Routes into RIPng
1. Click IPv6 Route Redistribution under Configuration > System Configuration > IPv6
Configuration > Routing Configuration in the tree view.
2. Click Interface Routes.
3. To redistribute all currently active interface routes into RIPng, click On in the Export all
Interfaces into RIPng field.
4. Enter a value in the Metric text box for the metric cost that the created RIPng routes will
have.
5. Click Apply.
6. Click Save to make your changes permanent.
7. To redistribute a specific interface route or routes into RIPng, click On next to the IPv6
interface for the route to redistribute into RIPng.
8. Enter a value in the Metric text box for the metric cost that the created RIPng routes will
have.
9. Click Apply.
10. Click Save to make your changes permanent.
Router Discovery
Configuring ICMPv6 Router Discovery
The ICMPv6 Router Discovery Protocol allows hosts running an ICMPv6 router discovery
client to locate neighboring routers dynamically as well as to learn prefixes and configuration
parameters related to address autoconfiguration. Nokia implements only the ICMPv6 router
discovery server portion, which means that the Nokia platform can advertise itself as a candidate
default router, but it will not adopt a default router using the router discovery protocol.
Beginning with IPSO 3.8.1 and as part of the new support of VRRP for IPv6 interfaces, only the
router in a VRRP master state sends router discovery advertisements, and the advertisements are
sent with the virtual IP address as the source address and the virtual MAC address as the MAC
address. Routers in a VRRP backup state do not send router discovery advertisements. When
VRRP failover occurs, the new master begins to send out router discovery advertisements. For