Nokia IPSO 4.0 Cell Phone User Manual


 
2
78 Nokia Network Voyager for IPSO 4.0 Reference Guide
Note
The maximum packet size must match the MTU of the link partner. Packets longer than
the length you specify are fragmented before transmission.
4. Click Apply.
5. Click Save to make your changes permanent.
ATM Example
This section describes how you might configure the interfaces of your IP security platform in an
example network, using Network Voyager.
The following figure shows the network configuration for this example.
In a company’s main office, Nokia Platform A terminates a serial line to an Internet service
provider, running PPP with a keepalive value of 10.
Nokia Platform A also provides Internet access for an FDDI ring and a remote branch office
connected through ATM PVC 93.
The branch office contains Nokia Platform B, which routes traffic between a local fast Ethernet
network and ATM PVC 52. It provides access to the main office and the Internet.
Nokia Platform A
Nokia Platform B
atm-s1p1c52 (192.168.3.1)
atm-s2p1c93 (192.168.3.2)
ser-s1p1c0 (192.168.2.1)
eth-s2p1c0 (192.168.4.1/24)
192.168.4.xxx
FDDI
192.168.1.xxx
(192.168.1.1/24)
fddi-s3p1c0
(192.168.2.93)
Provider
00037
Server
Server Server
ATM
Switch