Filter
Top Products
7
268 Nokia Network Voyager for IPSO 4.0 Reference Guide
IPv6 over IPv4 Tunnel (RFC 2185)
IPv6 over Ethernet (RFC 2464)
IPv6 over FDDI (RFC 2467)
IPv6 over PPP (RFC 2472)
IPv6 over ATM (RFC 2492, PVC only)
IPv6 over ARCNET (RFC 2497)
IPv6 over Token Ring (RFC 2470)
IPv6 over IPv4 (RFC 2529)
IPv6 to IPv4 (Internet Draft)
Generic Packet Tunneling (RFC 2473, IPv4 through IPv6 only)
RIPng for IPv6
Static Routes
Route Aggregation
Route Redistribution
IPv6 inetd
IPv6 telnet client and server
IPv6 FTP client and server
Utilities (ping, netstat, tcpdump, ndp)
Interfaces
To configure IPv6 logical interfaces
1. Click IPv6 Interfaces under Configuration > System Configuration > IPv6 Configuration in
the tree view.
2. Click the logical interface link to configure in the Logical column. Example:
eth-s1p1c0
3. Enter the IP address prefix in the New IP Address text box and the mask length (in bits) in
the New Mask Length text box.
The default mask length is 64.
4. Click Apply.
5. Click Save to make your changes permanent.
6. Click Up at the top of the page to take you back to the IPv6 Logical Interfaces page.
7. To enable the IPv6 address, click On in the IPv6 Active field.
8. Click Apply.
9. Click Save to make your change permanent.