Filter
Top Products
1
24 Nokia Network Voyager for IPSO 4.0 Reference Guide
Logging In to Network Voyager
When you log in to Network Voyager, the navigation tree you see depends on the role or roles
assigned to you. If the roles assigned to your user account do not include access to a feature, you
will not see a link to the feature in the tree. If they have read-only access to a feature, you will
see a link and be able to access the page, but all the controls will be disabled. For more
information on role-based administration, see “Role-Based Administration” on page 293.
Note
The system logs messages about both successful and unsuccessful attempts by users to
log in. These are stored in the /var/log/messages file.
To open Nokia Network Voyager
1. Open a Web browser on a computer with network connectivity to the IPSO system.
2. In the Location or Address text box, enter the IP address of the initial interface you
configured for the appliance.
You are prompted to enter a username and password. If this is the first login, enter the Admin
username and the password you entered when you performed the initial configuration.
You can select to log in with or without an exclusive lock on configuration changes. For
more information, see “Obtaining a Configuration Lock” on page 25.
For information about initial configuration, see the Getting Started Guide and Release Notes for
IPSO.
Note
If the login screen does not appear, you might not have a physical network connection
between the host and your appliance, or you might have a network routing problem. Confirm
the information you entered during the initial configuration and check that all cables are
firmly connected.
Logging Off
When you are finished with your Network Voyager session, or if you need to log in to a new
session, log out by clicking Log Off at the top of the Network Voyager window.
Note
The Log Off link does not appear if you disabled session management. For information
about session management, see “Network Voyager Session Management” on page 311.