Filter
Top Products
6
252 Nokia Network Voyager for IPSO 4.0 Reference Guide
Both the proprietary MIBs and the public MIBs are supplied with the system. To view more
detailed information about the MIBs, see the /etc/snmp/mibs directory.
Note
The SNMPv2-CONF MIB resides in the /etc/snmp/mibs/unsupported directory.
The SNMP agent implemented in Nokia IPSO enables an SNMP manager to monitor the device
and to modify the sysName, sysContact and sysLocation objects only.
Note
You must configure an SNMP string first to configure sysContact and sysLocation.
Use Network Voyager to perform the following tasks:
Define and change one read-only community string.
Define and change one read-write community string.
Enable and disable the SNMP daemon.
Create SNMP users.
Modify SNMP user accounts.
Add or delete trap receivers.
Enable or disable the various traps.
Enter the location and contact strings for the device.
SNMP Proxy Support for Check Point MIB
IPSO supports the use of a proxy for SNMP GetRequest and SNMP GetNextRequest for Check
Point objects. The following are guidelines and limitations you should be aware of.
Nokia Enhanced SNMP
Solution Suite PM IRP MIB
proprietary Note: IPSO does not send traps that this MIB supports when
the Nokia platform is used as an IP security device.
Nokia NE3S Registration MIB proprietary
Nokia Link Aggregation MIB proprietary Contains the traps required for managing link aggregation.
Nokia NTP MIB proprietary
SNMPv2-CONF IPSO does not support this MIB but it is included for those
customers who need it to enable their management tools.
This MIB resides in the /etc/snmp/mibs/unsupported
directory.
MIB Source Function