Filter
Top Products
6
260 Nokia Network Voyager for IPSO 4.0 Reference Guide
4. Click Save to make your changes permanent.
Configuring Location and Contact Information
The settings for location and contact information provide information to the management system
about where your device is located and who to contact about it.
Set the location and contact strings when you perform the initial configuration for SNMP on
your system.
To configure location and contact information
1. Choose SNMP under Configuration in the tree view.
2. In the SNMP Location String text field, enter the actual location of the device. Click Apply.
3. In the SNMP Contact String text field, enter the name of department or person who has
administrative responsibility for the device.
4. Click Apply.
5. Click Save to make your changes permanent.
Interpreting Error Messages
This section lists and explains certain common error status values that can appear in SNMP
messages. Within the PDU, the third field can include an error-status integer that refers to a
specific problem. The integer zero (0) means that no errors were detected. When the error field is
anything other than 0, the next field includes an error-index value that identifies the variable, or
object, in the variable-bindings list that caused the error.
The following table lists the error status codes and their corresponding meanings.
Error status code Meaning Error status code Meaning
0 noError 10 wrongValue
1 tooBig 11 noCreation
2 NoSuchName 12 inconsistentValue
3 BadValue 13 resourceUnavailable
4 ReadOnly 14 commitFailed
5 genError 15 undoFailed
6 noAccess 16 authorizationError
7 wrongType 17 notWritable
8 wrongLength 18 inconsistentName