Filter
Top Products
2
30 Nokia Network Voyager for IPSO 4.0 Reference Guide
IP2250 Management Ports
The Ethernet management ports on IP2250 systems are designed to be used for the following
purposes:
Managing the appliance
Firewall synchronization traffic
IP cluster protocol traffic
Connection to a log server
Caution
The management ports are not suitable for forwarding production data traffic. Do not
use them for this purpose.
Configuring Network Devices
Network Voyager displays network devices as physical interfaces. A physical interface exists for
each physical port on a network interface card (NIC) installed in the appliance. Physical
interface names have the form:
<type>-s<slot>p<port>
where:
<type>
is a prefix indicating the device type.
<slot>
is the number of the slot the device occupies in the appliance.
<port>
is the port number of the NIC. The first port on a NIC is port one. For example, a
two-port Ethernet NIC in slot 2 is represented by two physical interfaces:
eth-s2p1
and
eth-s2p2
.
The following table lists the interface-name prefixes for each type.
Type Prefix
Ethernet
eth
FDDI
fddi
ATM
atm
Serial
ser
T1/E1
ser
HSSI
ser
Token Ring
tok